Just so you guys know a thing or two about miniworks
Posted: Thu Feb 14, 2008 8:15 pmHEres an email you might find interesting. Sorry read form top to bottom
Ohh btw, it wasnt $300 for the brakes and rotors, it came out to almost $800 of you remember correctly. I noticed that you dont even advertise in the states anymore? Outstayed your welcome? Another thing, i paid way less to have the flywheel and clutch installed and they did a great job. I am very happy that i didnt let you take apart my engine. What about the koni thing huh? After talking to people @ minimania, alta, and outmotoring; i found out that if you had marked and measured then camber before taking apart the ass end, you could have reinstalled according to speck and i would have never had an uneven tire wear problem. Also you lied to me and said that the calipers never rusting, not true at all because withing 2 months the things look just like the others. Also the clip you "forgot" on the brakes caused uneven glazing on the caliper and now i have to replace them within the year. You really fucked me over Victor and you jerked my chain for a month while i was out of the country. And the missing gasket on the exhaust was causing a substantial leak. Oh and i forgot that when you installed my brakes, you ripped and detached the ebrake boot from its little plastic frame which is another thing i have to pay for.
<html><DIV>
<DIV> </DIV></DIV></html>
From: sales@miniworks.com
To: johnhall2131@hotmail.com
Subject: Re: SPAM-MED: Hey Victor, this is John Hall
Date: Thu, 14 Feb 2008 10:52:35 -0700
You are acting like an asshole.
OUR PRICES ARE FAIR, OUR WORK IS BETTER OR AS GOOD AS ANYONE ELSE
If you spend $200 to adjust the brakes, you are an idiot, there is no possible adjustment on the front brakes
and by the way $299 for rotors, pads and labor is a real good deal.
You are just a cry baby, all of THIS because we could not do the clutch and flywheel for YOU at a bargain PRICE,
and you had to take it somewhere else and PAY MORE.
You are right on one thing, I do not need you as a customer, nor do I need customers like you.
Victor
----- Original Message -----
From: john hall
To: Mini Works
Sent: Thursday, February 14, 2008 12:25 AM
Subject: RE: SPAM-MED: Hey Victor, this is John Hall
Just so you know, I just spent $200 on adjusting my breaks and another $500 in labor on the rear end not including the links ($250) and a gasket in the exhaust was missing. I hope that you dont do any more work on anyones car. I have told all of the local mini clubs (Tucson and Phoenix) that you work is $h*t and that you will rip them off. Thanks Victor for your help.
John
<html><DIV>
<DIV> </DIV></DIV></html>
> From: sales@miniworks.com
> To: johnhall2131@hotmail.com
> Subject: Re: SPAM-MED: Hey Victor, this is John Hall
> Date: Tue, 15 May 2007 11:31:16 -0700
>
> Hello John,
> I will work on the prices,
> We can do a set of rotors and pads with the labor for $299
>
> victor
>
> ----- Original Message -----
> From: "john hall" <johnhall2131@hotmail.com>
> To: <sales@miniworks.com>
> Sent: Tuesday, May 15, 2007 11:06 AM
> Subject: Re: SPAM-MED: Hey Victor, this is John Hall
>
>
> > Victor,
> >
> > Yes the stage 1 organic disc is what i wanted. Also i forgot to ask you
> > about maybe a set of rotors and i know that i need new pads, so what can
> > we do there?
> > John
> >
> >
> >
> >
> >>From: "Mini Works" <sales@miniworks.com>
> >>To: "john hall" <johnhall2131@hotmail.com>
> >>Subject: Re: SPAM-MED: Hey Victor, this is John Hall
> >>Date: Mon, 14 May 2007 09:06:15 -0700
> >>
> >>Hello John,
> >>
> >>Yes we can save you a few dollars,
> >>we can purchase these same parts directly from the manufacturers,
> >>the flywheel is made by Fidanza, and the clutch is a Spec clutch,
> >>all I need to know is what Clutch you want, they have stage 1, stage 2 or
> >>stage 3,
> >>for a daily model, the most popular is the stage 1.
> >>let me know and I will get you some pricing
> >>thanks
> >>
> >>Victor
> >>Mini Works
> >>480.922.6464
> >>
> >>----- Original Message ----- From: "john hall" <johnhall2131@hotmail.com>
> >>To: <sales@miniworks.com>
> >>Sent: Friday, May 11, 2007 10:29 AM
> >>Subject: SPAM-MED: Hey Victor, this is John Hall
> >>
> >>
> >>>Victor,
> >>> So i called minimania today and talked to them about setting up a deal
> >>> to get me a new clutch and flywheel. I talked them down to a 10%
> >>> discount on both items so it came out to $900 as apposed to $1000. but
> >>> they said they wouldnt ship it to you and that it would have to be
> >>> directly shipped to me. So, my question is, can you beat these prices
> >>> since i am going to have it ordered and installed through you? the part
> >>> numbers are NMG2000 (flywheel) and NMG1600 (Clutch Kit). How it looks
> >>> right now, i will be dropping off the car to you the morning of July 7
> >>> or the night of July 6. I will not be back in the country till August 2.
> >>> So that gives you a little over three weeks that you can complete all
> >>> the work needed. I really want to keep this job cheap as possible due to
> >>> lack of money, so tell me what you can do. sorry about the low-balling
> >>> but i didnt plan on taking this trip this summer but it is an biology
> >>> research project in the Galapagos Islands, so it is a once in a life
> >>> time experience. Thanks for your help .
> >>>John
> >>>
> >>>_________________________________________________________________
> >>>Make every IM count. Download Messenger and join the i'm Initiative now.
> >>>It's free. http://im.live.com/messenger/im/home/?s ... AGHM_MAY07
> >>>
> >>>
> >>
> >>
> >>
> >
> > _________________________________________________________________
> > Catch suspicious messages before you open them-with Windows Live Hotmail.
> > http://imagine-windowslive.com/hotmail/ ... ction_0507
> >
> >
>
>
>
Helping your favorite cause is as easy as instant messaging. You IM, we give. Learn more.
Ohh btw, it wasnt $300 for the brakes and rotors, it came out to almost $800 of you remember correctly. I noticed that you dont even advertise in the states anymore? Outstayed your welcome? Another thing, i paid way less to have the flywheel and clutch installed and they did a great job. I am very happy that i didnt let you take apart my engine. What about the koni thing huh? After talking to people @ minimania, alta, and outmotoring; i found out that if you had marked and measured then camber before taking apart the ass end, you could have reinstalled according to speck and i would have never had an uneven tire wear problem. Also you lied to me and said that the calipers never rusting, not true at all because withing 2 months the things look just like the others. Also the clip you "forgot" on the brakes caused uneven glazing on the caliper and now i have to replace them within the year. You really fucked me over Victor and you jerked my chain for a month while i was out of the country. And the missing gasket on the exhaust was causing a substantial leak. Oh and i forgot that when you installed my brakes, you ripped and detached the ebrake boot from its little plastic frame which is another thing i have to pay for.
<html><DIV>
<DIV> </DIV></DIV></html>
From: sales@miniworks.com
To: johnhall2131@hotmail.com
Subject: Re: SPAM-MED: Hey Victor, this is John Hall
Date: Thu, 14 Feb 2008 10:52:35 -0700
You are acting like an asshole.
OUR PRICES ARE FAIR, OUR WORK IS BETTER OR AS GOOD AS ANYONE ELSE
If you spend $200 to adjust the brakes, you are an idiot, there is no possible adjustment on the front brakes
and by the way $299 for rotors, pads and labor is a real good deal.
You are just a cry baby, all of THIS because we could not do the clutch and flywheel for YOU at a bargain PRICE,
and you had to take it somewhere else and PAY MORE.
You are right on one thing, I do not need you as a customer, nor do I need customers like you.
Victor
----- Original Message -----
From: john hall
To: Mini Works
Sent: Thursday, February 14, 2008 12:25 AM
Subject: RE: SPAM-MED: Hey Victor, this is John Hall
Just so you know, I just spent $200 on adjusting my breaks and another $500 in labor on the rear end not including the links ($250) and a gasket in the exhaust was missing. I hope that you dont do any more work on anyones car. I have told all of the local mini clubs (Tucson and Phoenix) that you work is $h*t and that you will rip them off. Thanks Victor for your help.
John
<html><DIV>
<DIV> </DIV></DIV></html>
> From: sales@miniworks.com
> To: johnhall2131@hotmail.com
> Subject: Re: SPAM-MED: Hey Victor, this is John Hall
> Date: Tue, 15 May 2007 11:31:16 -0700
>
> Hello John,
> I will work on the prices,
> We can do a set of rotors and pads with the labor for $299
>
> victor
>
> ----- Original Message -----
> From: "john hall" <johnhall2131@hotmail.com>
> To: <sales@miniworks.com>
> Sent: Tuesday, May 15, 2007 11:06 AM
> Subject: Re: SPAM-MED: Hey Victor, this is John Hall
>
>
> > Victor,
> >
> > Yes the stage 1 organic disc is what i wanted. Also i forgot to ask you
> > about maybe a set of rotors and i know that i need new pads, so what can
> > we do there?
> > John
> >
> >
> >
> >
> >>From: "Mini Works" <sales@miniworks.com>
> >>To: "john hall" <johnhall2131@hotmail.com>
> >>Subject: Re: SPAM-MED: Hey Victor, this is John Hall
> >>Date: Mon, 14 May 2007 09:06:15 -0700
> >>
> >>Hello John,
> >>
> >>Yes we can save you a few dollars,
> >>we can purchase these same parts directly from the manufacturers,
> >>the flywheel is made by Fidanza, and the clutch is a Spec clutch,
> >>all I need to know is what Clutch you want, they have stage 1, stage 2 or
> >>stage 3,
> >>for a daily model, the most popular is the stage 1.
> >>let me know and I will get you some pricing
> >>thanks
> >>
> >>Victor
> >>Mini Works
> >>480.922.6464
> >>
> >>----- Original Message ----- From: "john hall" <johnhall2131@hotmail.com>
> >>To: <sales@miniworks.com>
> >>Sent: Friday, May 11, 2007 10:29 AM
> >>Subject: SPAM-MED: Hey Victor, this is John Hall
> >>
> >>
> >>>Victor,
> >>> So i called minimania today and talked to them about setting up a deal
> >>> to get me a new clutch and flywheel. I talked them down to a 10%
> >>> discount on both items so it came out to $900 as apposed to $1000. but
> >>> they said they wouldnt ship it to you and that it would have to be
> >>> directly shipped to me. So, my question is, can you beat these prices
> >>> since i am going to have it ordered and installed through you? the part
> >>> numbers are NMG2000 (flywheel) and NMG1600 (Clutch Kit). How it looks
> >>> right now, i will be dropping off the car to you the morning of July 7
> >>> or the night of July 6. I will not be back in the country till August 2.
> >>> So that gives you a little over three weeks that you can complete all
> >>> the work needed. I really want to keep this job cheap as possible due to
> >>> lack of money, so tell me what you can do. sorry about the low-balling
> >>> but i didnt plan on taking this trip this summer but it is an biology
> >>> research project in the Galapagos Islands, so it is a once in a life
> >>> time experience. Thanks for your help .
> >>>John
> >>>
> >>>_________________________________________________________________
> >>>Make every IM count. Download Messenger and join the i'm Initiative now.
> >>>It's free. http://im.live.com/messenger/im/home/?s ... AGHM_MAY07
> >>>
> >>>
> >>
> >>
> >>
> >
> > _________________________________________________________________
> > Catch suspicious messages before you open them-with Windows Live Hotmail.
> > http://imagine-windowslive.com/hotmail/ ... ction_0507
> >
> >
>
>
>
Helping your favorite cause is as easy as instant messaging. You IM, we give. Learn more.
