Dynamic MiNi Collective

by **Louie B.** » Mon Oct 10, 2011 5:07 am

Jerry from Eurotechs has graciously agreed to open up his shop for us from 10am to 4pm on Saturday, November 19th for a tech day.

Most of the agenda has been booked but if you'd like to come by and watch or help or just hang out we'd love to see you there. also If you do have some work you need done come by and we may be able to squeeze you in.

Pizza and beverages will be provided!

Eurotechs
1803 E Rio Salado Parkway #104
Tempe, AZ 85281

by **Nemo** » Mon Oct 10, 2011 11:53 pm

This is a GREAT Opportunity for those who have not joined us on a Tech Day. I'll be there to help out as well and I am sure there will be others that have experience to help out as well.
Thanks Jerry!!!

by **R50** » Tue Oct 11, 2011 1:57 am

I have slightly mushy brakes and would like to see what is involved in changing lower control arm bushings

by **Oldgamefreak** » Tue Oct 11, 2011 3:26 pm

Well I do still have an end-link that needs replacing. That and if feels like my cars are starting to live there any way :lol:

.....

If only I could talk my wife into getting new springs.

THANK YOU JERRY!!!! You always go above and beyond!!!

by **MINImama** » Thu Oct 13, 2011 9:49 pm

Pepper is at EuroTechs right now, as I write this, and I have never felt as confident that she is being well-taken care of as I do right now.

by **Pete Immel** » Thu Oct 27, 2011 12:54 am

I'd love to come see whatever comes off, goes on, what the parts look like and meet Jerry. If I can get the day off from my new job, I'll be there. Times?
Pete

by **on2wheels** » Thu Oct 27, 2011 12:30 pm

I have a NM rear sway bar and a short shifter to install on the JCW. Thanks!

by **joe_bfstplk** » Thu Oct 27, 2011 11:57 pm

I have an old set of HR springs and a 16% pulley I'd like to get working....

C ya,
Dutch

by **azdavis** » Fri Oct 28, 2011 2:20 pm

We have had a few people have issues with convertible quarter window mech breaking... I had did one side about a month ago, and now the passenger side needs to be replaced. I just have to get the part for replacement. If anyone is interested in that...

by **Nemo** » Fri Oct 28, 2011 6:17 pm

OK...seems like there will be several projects on the 19 Of November.
So, the question now is from what time to what time? :-k

by **Louie B.** » Sat Nov 05, 2011 8:23 pm

OK It's on!

I'll be posting the official thread later this evening but I wanted to get this out there!

Saturday, November 19th
10:00am to 4:00pm (just in time to head up to Pavillions Car show)
Pizza and Beverages will be provided.

Jerry says w/ the manpower we have volenteering he thinks we should be able to get ALL of the jobs above taken care of! So come on out and bring your parts!

Even if you didn't get on the list come on out to hang out, watch the fun, and maybe even get something done to your MINI if there's enough time left.

by **Louie B.** » Sat Nov 05, 2011 8:25 pm

joe_bfstplk wrote:I have an old set of HR springs and a 16% pulley I'd like to get working....

C ya,
Dutch

Jerry wanted me to mention he recomends getting an alignment done after putting the springs in, and his alignment guy isn't open on Saturdays so you'll be on your own to get one.

by **Louie B.** » Sat Nov 05, 2011 8:29 pm

I guess I should also mention if you don't already have the parts give Jerry a call so he can give you a price/ get them ordered.

Eurotechs
480.656.0341

by **joe_bfstplk** » Sun Nov 06, 2011 12:06 am

Louie B. wrote:Jerry wanted me to mention he recomends getting an alignment done after putting the springs in, and his alignment guy isn't open on Saturdays so you'll be on your own to get one.

Didn't know they did alignments there at Eurotechs. I used to go to the Firestone at Dobson and Main for years. They did a great job, but the light rail took over that space, and I haven't found a place as good since.

Good to know.... Thanks!

C ya,
Dutch

by **Louie B.** » Sun Nov 06, 2011 2:10 am

joe_bfstplk wrote:
Louie B. wrote:Jerry wanted me to mention he recomends getting an alignment done after putting the springs in, and his alignment guy isn't open on Saturdays so you'll be on your own to get one.

Didn't know they did alignments there at Eurotechs. I used to go to the Firestone at Dobson and Main for years. They did a great job, but the light rail took over that space, and I haven't found a place as good since.

Good to know.... Thanks!

C ya,
Dutch

He doesn't do them on site. he has a prefered shop he takes to.

Dynamic MiNi Collective

DRP Tech Day - Sat Nov 19th - 10am to 4pm

DRP Tech Day - Sat Nov 19th - 10am to 4pm

Who is online